Accessories

Neoprene radio pocket

It is stretchy, thanks to which it fits well to the shape of the device. The hole diameter is approx. 50 mm, after stretching it approx. 75 mm.

Pocket with Velcro fastener on the shoulder strap.

SWING Tandem Spreaders “2-in-1” LITE

Very compact and lightweight spreaders “2-in-1” LITE

Speed system Free*Spee 3.0

Allows easy and precise adjustment of the speed system during flight

ANTI-G

 The “Anti-G” drag parachute is a safety device that allows safer spiral descents by reducing the G force in a spiral dive. This system is very simple to use and works with any type of glider.

 To attach Anti—G to X-Rated 6, a special pocket has been designed, passing from right to left, with a karabiner inside used to attach the

bridle of the small drag chute. This pocket is at the bottom behind the seat; it is easy for the pilot to find as it is located just above the air inlets

on the side of the harness. 

To properly use the drag parachute, simply open the zipper on the right or left (depending on which side you intend

to spiral), extract it, and deploy it before initiating the spiral. 

The advantages of using it are a higher sink rate and up to a 40% reduction in G-Force. 

You can descend in spiral and then disable the drag chute using the handle and land as normal with the Anti-G parachute deployed (butdisabled). 

Otherwise, once exiting the spiral, you need to disable it and then put it back in its pocket and close the pocket zipper. At this point it is

ready to be used again.

WARNING:

To ensure correct use of the “Anti-G” parachute it is important that you carefully read and understand the instructions included in the parachute manual.

The “Anti-G” braking parachute is optional equipment and can be purchased separately

Drag-chute

Not just another anti-G on the market.

The Kortel drag chute has a projected area of 1.6m² and a diameter of approximately 145cm.

It is the largest drag-chute available on the market today, for greater efficiency in rapid descent manoeuvres.

But above all, it has two power positions, allowing it to manage several planes of finesse in a straight line, in order to manage the proximity of an aerial surface or the ceiling while continuing to run.

An exclusive hollow swivel limits the effects of rotation and maintains good sink and recovery characteristics, even after prolonged use.

With a weight of 470g, it has been specially developed for the Kanibal race 2 with its central attachment. 

This attachment improves the feel when the drag chute is deployed, stabilizing the harness in yaw and avoiding the jerks generated by a link attachment.

As an indication, at 4G, we reached 12m/s drop rate without the drag-chute, and 20m/s with the drag chute deployed. It therefore allows a significant gain without having to withstand more G's.

(Indicative values, may vary depending on the wing used and the temperature and pressure conditions).

Projected surface area: 1.6m².

Diameter: 145cm

Weight: 470g

Reversible ballast sak

The Sak Ballast Reversible allows you to easily carry your ballast or other belongings in competition. Reversible, it allows to store the ballast directly in the pocket of the Kanibal Race II and to take out the drain hose.

Features

Ballast sak. Small 2-strap backpack

Ballast carrier bag

Suspension hooks for frontal carrying

Outlet Drain pipe

Compression straps

Suspension straps

Possibility to hang the sak in the frontal position

Data:

Volume: 8L

Weight: 300g

(delivered without the water bag)

T-Bone Link

The T-Bone link is a Kortel Design exclusive!

All the advantages of the flexible connector (solidity, lightness, multi-axial work, longevity), integrating the brand new "Konnect " quick connection for 10g per unit.

With a breaking load of more than 2400daN, it can be used for all types of connections with support straps of less than 25mm.

Price for pair.

Soft Link

Ultra-light flexible connector (10g per pair), it is ideal for all types of links that do not need to be handled regularly.

With a breaking load of over 2200daN, it can be used on many types of connections, whose support straps are less than 25mm.

RESTRICTION: Do not use on the tandem spreader link, or on any link related to the tandem reserve parachute.