Dodatkowa wkładka do karabinka Charly Quick-Out

Ronstan 40 automatic capstan pulley

Single pulley with soft shackle

Description:

The pulley provides a holding power of 14:1

Fully automatic load-sensing pawl engagement

Stainless steel swivel shackle provides unlimited pulley rotation

Roller made of anodized aluminum

Durable Acetal® ball bearings

Cheeks reinforced with nylon

Roller Ø 40 mm

max. Ø rope 9 mm

MWL 175 kg

BL 500 kg

Weight 35g

Shipping cost included

price per item

Speed system Free*Spee 3.0

Allows easy and precise adjustment of the speed system during flight

The Charly Paralock 3 is a modern paragliding carabiner that offers numerous advantages and safety features. It can save lives in various dangerous situations.

This new generation carabiner is useful not only during emergency water landings and encountering strong ground winds. The quick-release function for the paraglider can also prevent the dangerous downplaning effect. This is a significant acceleration of the descent speed with an unfolded paraglider after deploying a rescue parachute.

Ronstan 55

Single pulley with soft shackle and hook

Description:

Ultra light

2-stage low-friction orbital ball bearing system

The highest working load in its class

Low profile

Durable Dyneema® shackle, UV resistant

Ball bearings

Cheeks reinforced with nylon fiber

Carbon fiber roll

Roller Ø 55 mm

max. Ø rope 10 mm

MWL 500 kg

BL 1000 kg

Weight 75g

Shipping cost included

price per item

Ronstan block 30

Description:

BB Orbit Blocks™ are the lightest in the world. Thanks to extensive research and development works, virtually all metal elements have been replaced with technologically advanced polymers and their equivalents.

Weight and size are further reduced in various block configurations. 

Single ball bearing block with butterfly lock, has an intermediate ring connection. 

Result? The lowest weight possible.

Drag-chute

Not just another anti-G on the market.

The Kortel drag chute has a projected area of 1.6m² and a diameter of approximately 145cm.

It is the largest drag-chute available on the market today, for greater efficiency in rapid descent manoeuvres.

But above all, it has two power positions, allowing it to manage several planes of finesse in a straight line, in order to manage the proximity of an aerial surface or the ceiling while continuing to run.

An exclusive hollow swivel limits the effects of rotation and maintains good sink and recovery characteristics, even after prolonged use.

With a weight of 470g, it has been specially developed for the Kanibal race 2 with its central attachment. 

This attachment improves the feel when the drag chute is deployed, stabilizing the harness in yaw and avoiding the jerks generated by a link attachment.

As an indication, at 4G, we reached 12m/s drop rate without the drag-chute, and 20m/s with the drag chute deployed. It therefore allows a significant gain without having to withstand more G's.

(Indicative values, may vary depending on the wing used and the temperature and pressure conditions).

Projected surface area: 1.6m².

Diameter: 145cm

Weight: 470g

Neoprene radio pocket

It is stretchy, thanks to which it fits well to the shape of the device. The hole diameter is approx. 50 mm, after stretching it approx. 75 mm.

Pocket with Velcro fastener on the shoulder strap.

T-Bone Link

The T-Bone link is a Kortel Design exclusive!

All the advantages of the flexible connector (solidity, lightness, multi-axial work, longevity), integrating the brand new "Konnect " quick connection for 10g per unit.

With a breaking load of more than 2400daN, it can be used for all types of connections with support straps of less than 25mm.

Price for pair.

Windsock

Due to its size (ø 32 cm, length 125 cm) is visible from great distance and due to the colours (blue at the front, red at the back side) no danger of confusion of the wind direction.

Material: Robust and light Nylon Ripstop.

Please note: The windsock is delivered without tubing. Please do not forget to order the corresponding TUBING and an EARTH STAKE!

Price does not include shipment costs.

Snaplock

 Hang gliding and paragliding carabiner with conventional twist lock

Features:

Working load limit (air sports): 115 DaN* per carabiner

Drop-forged from Titanal, 76 g

Breaking load: 3 000 DaN

Breaking load, open gate: 2 000 DaN

Load without permanent deformation, open gate: 1 600 DaN

Inside height: 60 mm

Suitable for belt widths 25-30 mm, tucked in up to 45 mm

* 1 daN (Dekanewton) = 10 N (newton)  ≈ 1 kg

ANTI-G

 The “Anti-G” drag parachute is a safety device that allows safer spiral descents by reducing the G force in a spiral dive. This system is very simple to use and works with any type of glider.

 To attach Anti—G to X-Rated 6, a special pocket has been designed, passing from right to left, with a karabiner inside used to attach the

bridle of the small drag chute. This pocket is at the bottom behind the seat; it is easy for the pilot to find as it is located just above the air inlets

on the side of the harness. 

To properly use the drag parachute, simply open the zipper on the right or left (depending on which side you intend

to spiral), extract it, and deploy it before initiating the spiral. 

The advantages of using it are a higher sink rate and up to a 40% reduction in G-Force. 

You can descend in spiral and then disable the drag chute using the handle and land as normal with the Anti-G parachute deployed (butdisabled). 

Otherwise, once exiting the spiral, you need to disable it and then put it back in its pocket and close the pocket zipper. At this point it is

ready to be used again.

WARNING:

To ensure correct use of the “Anti-G” parachute it is important that you carefully read and understand the instructions included in the parachute manual.

The “Anti-G” braking parachute is optional equipment and can be purchased separately

SWING Tandem Spreaders “2-in-1” LITE

Very compact and lightweight spreaders “2-in-1” LITE