…whatever you want!
You’re sure to be impressed by the Brave 4, which features the modular Brave ZIPON System, making it the quick-change artist among convertible harnesses.
It takes just a matter of seconds to adapt the Brave 4 for your particular purpose, whether it’s ground handling, speed riding, speed flying, hike&fly or paragliding. It’s light in weight, but it still has impressive comfort and durability, and a sleek, minimalist design in whatever mode it is used.
The Brave 4 airbag module is unique for this category of harness. It is attached at seven points, thus forming, together with the harness module, an LTF-certified, compact unit. Its damping values are excellent for this class and compare well with modern standard harnesses.
Optional airbag for maximum safety
High agility through separate leg straps
Versatile concept in a modular system
Free delivery from 300 zł
14 days for return
HARNESS CONFIGURATIONS AND FEATURES:
Brave 4-Basic module
The Brave 4-Basic module is a comfortable ultra-light harness, which adjusts perfectly to your body and follows every movement.
This mode is suitable e.g. for ground handling or quick hike&fly trips.
Brave 4-speed riding/speed flying mode
The rear storage pocket is approx. 22 litres, which provides sufficient capacity for the most important gear needed by speed riders/speed flyers. Like the previous model, the Brave 4 offers optimum contact to the glider, both with and without skis.
Together with the Brave ZIPON backpack module, the Brave 4 becomes a full-featured convertible harness with an extremely functional alpine backpack, which can also be used as a stand-alone backpack.
In harness mode, the backpack disappears completely into the rear storage pocket and there is still enough storage space for extra luggage.
In backpack mode, it has enough space even for “normal” paragliders up to at least size M, depending on how it is packed, and there are various attachment options for ski and/or trekking equipment.
The ventilated back system makes it extremely comfortable to carry, even on extended trips.
Brave 4-paraglider mode
The airbag module is installed in just a few steps and turns the Brave 4 into a comfortable EN/LTF-certified convertible paraglider harness.
Nitinol reinforcing rods ensure that the airbag operates perfectly even during the launch phase. If a front reserve and a speed system are also installed, the Brave 4 is the perfect solution for travellers and social pilots who want to be equipped with a small paraglider backpack for all eventualities.
Features of speed riding/speed flying module
storage space of approx. 22 litres in the distinctive Brave design
small inside pocket
side attachments for poles
Swing Brave ZIPON System
individual leg loops, no seat-board
floating shoulder straps
adjustable back recline angle
access hole for drinking tube
stable and robust design which is very comfortable to carry
side pocket with zip closure for Swing Speedbag 2
ready for speed-system set
includes lightweight automatic carabiners
option to connect leg loops
155cm – 195cm, one size fits all
pack volume of approx. 45 litres
ventilated back system with 3D mesh, making it very comfortable to carry
ergonomically shaped shoulder straps with 3D mesh
access hole for drinking tube
attachment points for skis and poles
elasticated side pockets
load control straps and compression straps
universal elastic cords in the front section for helmet or bivi equipment
loops for storing additional luggage
Materials and specifications
Back storage compartment 270g
Alpine backpack 790g
Harness base incl. Carabiner 1228g
Total weight of all modules: 2830g
Light and robust material mix of Cordura® and Babyrib
Light, functional buckles
Stable plastic seat board
Accelerator / Speed system
Cockpit / front container
Deuter helmet holder
Deuter side pockets
Deuter Streamer (drinking system 3 liters)
Deuter Raincover III
Deuter Transport Cover
Quick out carabiner mountable
Controllable rescue can be built in
|Avaliable sizes||one size|
|Carabiner distance||37 – 43 cm|
|Suspension height of the seat board||–|
|max. load||120 kg / 8g LTF|
|Protector||LTF-Certification 91/09 and EN 1651:1999|
|Rescue – connection||optional front container|
|LTF-Certification||LTF 91/09, EN 1651:1999|