Electronics

With the remote control, you can operate the XC Tracer Maxx without the need to release the brakes. The functionality is the same as the red button on the Maxx. The only difference is that double-clicking (changing the volume) is not supported, and you cannot turn off the Maxx with the remote control.

In parallel to the remote control, the XC Tracer Maxx can transfer data to a mobile phone, tablet, or e-reader via BLE.

SYS'One V3 is a micro vario with sound and led. Essential for hiking or trips.

Technical details

Function :         Vario with sound and light

Size :          5.3cm x 4.3cm x 1.4cm

Weight :            19 gr including battery

Rising threshold : from +0.1 m/s to +0.5m/s

Falling threshold : from -0.5 m/s to -2.5m/s

Thermal sniffer : activable from -0.1m/s to +0.1m/s

Volume :           3 levels plus 'OFF' position

Autonomy :        290h

Battery :            Cell coin CR2450 included

Wrist fixing :      wrist velcro included

Helmet fixing :    stickable velcro inluded

10 years warranty

Sys’Nav XL: compact technology!

Simple, light and efficient.

A new generation screen:

This is the first thing you’ll notice when you’ll take a SYS'Nav XL in your hands! 30% larger than its little brother’s, 

the 2.7'' screen has an active matrix reflective technology similar to the one used in the SYS'Evolution. 

The advantages for the pilot:

- Optimum readability outdoors (the more sun, the more contrast)

- Lower consumption (80% less than a traditional screen and no need for

backlighting)

Moreover, the resolution of the screen (400x200 pixels) has been dramatically

improved (22 times more precise than the SYS'Nav V3 screen) with a spacing

between each pixel of 0.147mm (by comparison, it is 0.152mm on the

SYS'Evolution). The pilot can display more information and details on the same

screen. The display is also more pleasant to the eye.

The Air3 7.3 is a true onboard computer. 

It is a ruggedized Android tablet with a high-capacity battery and a 1000-nit display. The Air 3 7.3 comes with XCTrack Pro pre-installed. 

This makes it the ultimate tool for cross country. If you have to choose only one device, this is it! 

System

Processor ARM A73 – 2.0 GHz Octacore.

RAM 8 Gb.

Storage 128 Gb + MicroSD slot (up to 128 GB).

Android 10

Sensors

Industrial grade GPS – GNSS GPS+Glonass+Beidou+AGPS

Baro/Vario based on a highly sensitive swiss sensor (Te connectivity)

Accelerometer sensor

Geomagnetic sensor

Gravity sensor

Compass

Gyro sensor

Light sensor

The Air3 7.3+  is the most advanced flight computer available on the market for the most demanding pilots which additionally include Fanet and Flarm (Tx) - compared to Air3 7.3

It is a ruggedized Android tablet with a high-capacity battery and a 1000-nit display. The Air 3 7.3 comes with XCTrack Pro pre-installed. 

This makes it the ultimate tool for cross country. If you have to choose only one device, this is it! 

System

Processor ARM A73 – 2.0 GHz Octacore.

RAM 8 Gb.

Storage 128 Gb + MicroSD slot (up to 128 GB).

Android 10

Sensors

Industrial grade GPS – GNSS GPS+Glonass+Beidou+AGPS

Baro/Vario based on a highly sensitive swiss sensor (Te connectivity)

Accelerometer sensor

Geomagnetic sensor

Gravity sensor

Compass

Gyro sensor

Light sensor

Maximum for everyone

Whether you're a beginner or a pro – flying with the XC Tracer Maxx III is more intuitive than ever before. What the vario indicates through its beep tones perfectly matches your sensations. This makes finding and centering thermals significantly easier and faster compared to a conventional variometer. Thanks to the clear topographic display, you always know exactly where you are, which safe landing spots are within reach, and how terrain features affect thermal development and valley winds. This ensures not only safer flights but also smarter tactical decisions.